THIS IS THE RARE "1ST DESIGN" 13/16" DIAMETER LINK
FOR THE APPLICATIONS BELOW LISTED WITH ***, GM BEGAN MAKING THESE CARS WITH THIS 13/16" DIAMETER LINK
IN THE MIDDLE OF PRODUCTION, THEY CHANGED TO A 7/8" DIAMETER LINK (WE ALSO HAVE THE 7/8" LINK AVAILABLE IN PART #107-226)
SINCE THESE 13/16" LINKS WERE MADE ON A SMALLER PERCENTAGE OF THE CARS, THEY HAVE BECOME ALMOST IMPOSSIBLE TO FIND OVER THE YEARS
ANOTHER ISSUE HAS BECOME THAT WHEN YOU ASK THE PARTS STORE FOR A DRAG LINK FOR A 64 CHEVELLE, CUTLASS, ETC, THEY WILL PROBABLY GIVE YOU THE 7/8" LINK, WHEN YOU MIGHT ACTUALLY NEED THE 13/16"
WHILE THE DIAMETER OF THESE LINKS IS HOW GM DESIGNATED BETWEEN THE 2, THAT IS NOT REALLY THE CHARACTERISTIC THAT DETERMINES IF THEY WILL FIT OR NOT
THE 13/16" LINK HAS 7/16"-20 THREAD TAPERED STUDS, WHILE THE 7/8" LINK HAS 1/2"-20 THREAD TAPERED STUDS
BECAUSE THESE STUDS ARE DIFFERENT SIZES, YOU HAVE TO MAKE SURE THAT YOU KNOW WHICH LINK YOU NEED, SO THEY WILL CORRECTLY FIT YOUR PITMAN ARM AND IDLER ARM
THIS IS THE 13/16" DIAMETER LINK WITH 7/16"-20 THREAD TAPERED STUDS
REPLACES OEM CENTER LINK
BRAND NEW PIECE
FITS: *1964 CHEVY CHEVELLE, EL CAMINO, MALIBU, & MONTE CARLO*** *1964 BUICK CENTURY, LUXUS, REGAL, & SPECIAL (RWD)*** *1964-65 OLDSMOBILE CUTLASS, F85, VISTA CRUISER, 4-4-2, & CALAIS (RWD)*** *ALL 1966-67 OLDSMOBILE CUTLASS, F85, VISTA CRUISER, 4-4-2, & CALAIS (RWD) *ALL 1964-65 PONTIAC LEMANS, GRAND LEMANS, GTO, GRAND AM, TEMPEST, & T37
SPECIFIC DIMENSIONS: *CENTER OF PITMAN ARM PIN TO CENTER OF IDLER ARM PIN: 23 1/4" *CENTER OF LEFT SIDE INNER TIE ROD END HOLE TO CENTER OF RIGHT SIDE INNER TIE ROD END HOLE: 14 3/8" *CENTER OF PITMAN ARM PIN TO CENTER OF LEFT (DRIVERS) SIDE INNER TIE ROD END HOLE: 3" *CENTER OF RIGHT (PASSENGERS) SIDE INNER TIE ROD END HOLE TO CENTER OF IDLER ARM PIN: 5 7/8"
